日韩美女一级视频_欧洲精品久久久_在线免费观看黄色_chinese真做videos_香蕉狠狠爱视频_好爽又高潮了毛片视频国产

News
Causes of shrinkage, shrinkage and underpouring of copper castings
2023-08-29

When the copper casting appears shrinkage, shrinkage phenomenon, in fact, it is because its own pouring temperature is relatively high or low, the next word, it is because its own casting speed is relatively fast or too slow caused; The shrinkage and shrinkage of the copper casting, that is, because the design of the pouring system is not suitable, as well as the shortage of the feeding effect of the riser, the cold iron position is not conducive to the solidification of the sequence.


In this respect, we should pay attention to adjusting its pouring temperature and pouring speed, and then, we should pay attention to improving its pouring system design, in this respect, in fact, it will facilitate us to carry out sequential solidification and increase its riser feeding capacity. It is reasonable to set up a dark riser or use a cold core to prevent overheating of individual parts of its metal type.




In the face of the bottom casting phenomenon of copper casting, we actually need to pay attention to its pouring speed can not be too slow, and when the top casting, do not be too fast, in this respect, in fact, it is to prevent the phenomenon of local overheating.

For the insufficient pouring (lack of meat) defects of copper casting, to a large extent, it is because the impurity content is relatively high, and the fluidity itself is relatively low, and then, because the pouring temperature is too low, or because the pouring speed is too slow or the phenomenon of mold leakage will lead to the production of insufficient pouring (lack of meat) defects.



Jiaxing Rongchang Bearing is a professional production of plain bearings company, is approved by the relevant state departments registered enterprises. Main products: copper sleeve, copper bearing, copper slide, copper slider, copper worm gear, sliding bearing seat and other copper products. Our company adopts the advanced production process ---- centrifugal casting, the copper sleeve and copper bearing shell produced can significantly improve the tightness and wear resistance of the castings compared with sand casting, and have good tensile strength, flexural strength and tensile ratio. The material of copper sleeve is brass, tin bronze, aluminum bronze, etc. The company adheres to the principle of "integrity first, customer first", and has established long-term friendly cooperative relations with many enterprises. Warmly welcome friends from all walks of life to visit, study and negotiate business, hotline: 0573-84609502!!


主站蜘蛛池模板: 綦江县| 台前县| 广饶县| 汶上县| 石柱| 红安县| 新郑市| 揭西县| 宁夏| 陆良县| 九寨沟县| 大连市| 苏尼特左旗| 泗洪县| 绥芬河市| 太原市| 固阳县| 闻喜县| 丰原市| 潮州市| 和平县| 兴隆县| 祁东县| 长乐市| 青神县| 普定县| 通许县| 观塘区| 中宁县| 安多县| 扎赉特旗| 梧州市| 富锦市| 涞源县| 会理县| 新蔡县| 高台县| 墨竹工卡县| 苗栗市| 桂东县| 景德镇市|